# Tip of the iceberg

> An annotated edition of this paper on Fermat's Library, where scientists and readers explain its ideas, equations and history in the margins. Annotated edition: https://fermatslibrary.com/s/tip-of-the-iceberg

- **Authors:** Henry Pollack
- **Published:** 2019
- **Topic:** Physics
- **Original:** https://s3-us-west-1.amazonaws.com/fermatslibrary/uploads%2F1676805700307-84s9eukc8sp-753a39b3394eb826cae53087c9a9701c%2F10.1063%40PT.3.4373.pdf
- **Pages:** 2
- **Annotations:** 6 comments in 6 threads
- **Featured:** Fermat's Library Journal Club
- **Annotated edition:** https://fermatslibrary.com/s/tip-of-the-iceberg

## Annotations

### Annotation 1 (page 1)

Beside the passage: “When a totally submerged lower-density body is released, the buoyancy force causes it to rise until it reaches a ﬂoating equilibrium. The tip then rests above the surface and the root below it, with the mass of each determined by the density contrast between the ﬂoating solid and the surrounding ﬂuid. Figure 1 depicts …”

**Annotation** by Luís Batalha (2023-02-19):

> The most well-known image associated with the "tip of the iceberg" metaphor was taken by professional photographer Ralph Clevenger, who composed the image using 4 separate photographs: the shot of the clouds and underwater water was taken in Santa Barbara. The picture of the top part of the iceberg was taken in Antarctica and the bottom part in Alaska.
>
> The image was created with a marketing plan in mind. The "tip of the iceberg" expression is a metaphor for the idea that the visible portion of an iceberg is only a small fraction of its total size.
>
> The image has been widely used for inspirational and advertising purposes and has generated almost $1M in sales.
>
> ![](https://assets.nautil.us/7372_8f91c9c261bfa0650898a921928d0950.png)

### Annotation 2 (page 1)

Beside the passage: “When a totally submerged lower-density body is released, the buoyancy force causes it to rise until it reaches a ﬂoating equilibrium. The tip then rests above the surface and the root below it, with the mass of each determined by the density contrast between the ﬂoating solid and the surrounding ﬂuid. Figure 1 depicts …”

**Annotation** by Luís Batalha (2023-02-19):

> In February 2021 glaciologist Megan Thompson-Munson actually [tweeted](https://twitter.com/GlacialMeg/status/1362557149147058178) a plea for scientists to draw icebergs accurately. Megan's tweet inspired the creation of a [tool](https://joshdata.me/iceberger.html) to see how an iceberg of arbitrary shape would float.

### Annotation 3 (page 1)

Beside the passage: “What are the parameters that deﬁne a stable equilibrium orientation? A ﬂoating object must satisfy Archimedes’s principle by displacing a mass of ﬂuid equal to its own. Because the object is less dense than the underlying ﬂuid, it projects some volume above the surface and some volume below. Thus the first parameter …”

**Annotation** by Luís Batalha (2023-02-19):

> - A floating body is **stable** if, when it is displaced, it returns to equilibrium.
> - A floating body is **unstable** if, when it is displaced, it moves to a new equilibrium.
>
> ![](https://i.imgur.com/cI6pEtO.png)
>
> The given diagram illustrates a floating object that is tilted at an angle Δθ. In its untilted position, the center of gravity, G, is the point where the weight of the object, W, is exerted. On the other hand, the center of buoyancy, B, represents the centroid of the volume of fluid displaced by the object, and the buoyancy force, FB, acts on this point.
>
> When the body tilts, its centre of buoyancy shifts to a new location, B', due to the change in the shape of the displaced volume. The point at which a vertical line from B' intersects the body's line of symmetry is called the metacentre, M. The buoyancy force, FB, now acts at B'.
>
> The central diagram in the figure shows that the weight, W, and FB create a restoring moment that brings the body back to its untilted position. However, the right-hand diagram in the figure demonstrates that W and FB also generate an overturning moment that causes the body to tilt further in the same direction.
>
> Thus, it can be concluded that if the metacentre, M, is situated above the centre of gravity, G, the body is considered stable. Conversely, if the metacentre, M, is located below the centre of gravity, G, the body is regarded as unstable.

### Annotation 4 (page 2)

Beside the passage: “D”

**Annotation** by Luís Batalha (2023-02-19):

> It's fascinating how homogeneous bodies with a symmetry like a cylinder can float in surprising ways: with the axis of
> symmetry tilted away from vertical at strange angles.
>
> Below are some Stable orientation of cylinder of density 1/2 as function of H/R by E. N. Gilbert.
>
> ![](https://i.imgur.com/orgu2Kp.png)

### Annotation 5 (page 2)

Beside the passage: “How will an iceberg shaped like the one shown in ﬁgure 1 establish a stable equilibrium orientation? A geometry useful for examining stability quantitatively is the circular cylinder of length H and diameter D, as shown in ﬁgure 2. When H < D, the cylinder is a disk, and when H > D, the cylinder is elongated, like a …”

**Annotation** by Luís Batalha (2023-02-19):

> Icebergs also "topple" and one of the causes for this is the constant change in shape due to non-uniform melting.

### Annotation 6 (page 2)

Beside the passage: “FIGURE 2. DOMAINS OF STABILITY FOR FLOATING CYLINDERS. A plot of four stability domains is shown as a function of a cylinder’s shape H/D and the solid-to-liquid density ratio ρ. Each domain is characterized by the equilibrium orientation in which a cylinder will float. The dotted line at the density ratio ρ = 0.9 …”

**Annotation** by Luís Batalha (2023-02-19):

> [Stanislaw Ulam](https://en.wikipedia.org/wiki/Stanislaw_Ulam) once asked if spheres are the only homogeneous bodies that can float in every orientation. To this day, no one has been able to proved or disprove the question.

## Full text

Extracted from the PDF. [Annotation N] marks where each annotation above sits.

#### Page 1

70 PHYSICS TODAY | DECEMBER 2019

T

he phrase “tip of the iceberg” suggests that what you see is much less than what is hidden from view. The concept of a tip above seawater and a much larger root below more or less conforms to Archimedes’s principle of buoyancy: The force exerted on a body partially or completely immersed in a ﬂuid of higher density is directed upward and is equal to the weight of the ﬂuid that the body displaces.

When a totally submerged lower-density body is released, the buoyancy force causes it to rise until it reaches a ﬂoating [Annotation 1] equilibrium. The tip then rests above the surface and the root below it, with the mass of each determined by the density contrast between the ﬂoating solid and the surrounding ﬂuid. Figure 1 depicts a common representation of such an equilibrium. [Annotation 2] But the conﬁguration is pure artistic license—it does not display a stable orientation and does not exist in nature.

Sphere, cube, and cylinder What’s wrong with the image? A ﬂoating elongated iceberg can satisfy the buoyancy requirements of Archimedes’s principle in many orientations, but most, including that depicted in ﬁgure 1, turn out to be unstable. To see an example of such an instability, take a wine cork and immerse it in water in any orientation. Upon release, the cork will rise to the surface and ﬂoat only with its long axis horizontal—that is, parallel to the surface of the water.

An equilibrium orientation of a ﬂoating body occurs when the center of gravity (the center of mass of the whole object) and the center of buoyancy (the center of mass of just the submerged part) are vertically aligned. If perturbations from wind, waves, or melting lead to a small departure of that alignment, a torque is created that reorients the body. If the torque ampliﬁes the misalignment, the orientation is unstable; if the torque reduces the misalignment, the orientation is stable.

What are the parameters that deﬁne a stable equilibrium orientation? A ﬂoating object must satisfy Archimedes’s principle by displacing a mass of ﬂuid equal to its own. Because the object is less dense than the underlying ﬂuid, it projects some volume above the surface and some volume below. Thus the first parameter that determines the stable equilibrium is the density contrast between the floating body and the sur- [Annotation 3] rounding fluid, here defined as a ratio ρ of the two densities, with 0 < ρ < 1.

The density of ocean water depends on both temperature and salinity; the density of ice depends on ambient temperature and the concentration of bubbles and structural voids. But an ice–water density ratio of 0.90 is accurate enough to charac-

terize the stability of ice objects aﬂoat in the ocean. It is behind the tip-of-the-iceberg concept because at typical densities of the two phases, about 90% of an iceberg’s volume is submerged, leaving only the tip above water.

The second important parameter is the shape of the ﬂoating body. Consider a ﬂoating sphere. Once its fractional volumes

Henry Pollack is an emeritus professor of geophysics at the University of Michigan in Ann Arbor.

QUICK STUDY

Tip of the iceberg

Henry Pollack

The conditions required for an object to float in a stable orientation sometimes lead to surprising results.

FIGURE 1. AN ARTISTIC RENDITION OF A FLOATING ICEBERG in apparent equilibrium. This orientation could never stably exist because an elongated piece of ice would float on its side, not on its head. (Image by iStock.com/the-lightwriter.)

#### Page 2

DECEMBER 2019 | PHYSICS TODAY 71

above and below the ﬂuid surface have been established by the density contrast, it will ﬂoat stably in any orientation. But a cubic body has well-deﬁned stable orientations relative to the ﬂuid surface that over a wide range of densities do not include the intuitive orientations—ﬂoating with a face or edge parallel to the ﬂuid surface or with a corner pointing upward, perpendicular to the surface. To test that assertion experimentally, just place a cube of wood in water and let it stabilize.

How will an iceberg shaped like the one shown in ﬁgure 1 establish a stable equilibrium orientation? A geometry [Annotation 5] useful for examining stability quantitatively is the circular cylinder of length H and diameter D, as shown in ﬁgure 2. When H < D, the cylinder is a disk, and when H > D, the cylinder is elongated, like a wine cork or pencil. The question raised by ﬁgure 1 is whether cylindrical bodies of ice whose lengths exceed their diameters ﬂoat with their long axes perpendicular to the water surface? The answer is generally no, particularly for elongated cylinders with H > 2D.

The shape of stability In 2004 D. S. Dugdale presented a useful discussion of the ﬂoating-cylinder problem. He deﬁned four domains of stable equilibrium in density–shape space: (I) The cylinder ﬂoats with its rotational axis perpendicular to the water surface and its circular faces parallel to the water surface. (II) The cylinder ﬂoats with its rotational axis parallel to the water surface and its circular faces partially submerged to a depth dependent on the density of the cylinder. (III) The rotational axis of the cylinder is tilted at an angle neither parallel nor perpendicular to the surface. (IV) The orientations described in I and II are both stable.

Figure 2 illustrates the complexity of those domains of stable equilibrium as a function of density contrast and cylinder shape. For ice ﬂoating in water (ρ = 0.9), stable equilibria exist only under the conditions of domains I, II and IV; the density conditions that yield stable equilibria within domain III (that is, in the range 0.2 < ρ < 0.8) exclude the ice–water density contrast. Therefore, ice cylinders ﬂoating in water will stabilize in only two orientations—with the cylindrical axis either perpendicular or parallel to the water surface.

In 1991 Edgar Gilbert showed that for a stable equilibrium with the cylindrical axis perpendicular to the water surface, the following condition must hold: ρ(1 − ρ)(2H/D) 2 < 0.5. For ρ = 0.9, the equation requires that H/D < 1.1785. A glance at the iceberg in ﬁgure 1 leaves li"le doubt that its H/D ratio is greater than that. So the iceberg violates the stability condition required for the cylinder to ﬂoat with its rotational axis perpendicular to the water surface. It would therefore spontaneously reposition itself to an orientation with its rotational axis hori-

zontal. In that equilibrium orientation, the waterline on the cylinder is a rectangle of length H and width w.

The width is determined by the density diﬀerence between the ﬂoating body and the ﬂuid—that is, by how much of the cylinder is submerged. Gilbert showed that the equilibrium is stable if w < H. For ρ > 0.5, w < D, and all cylinders where H/D > 1, the condition for stability is met because w < D < H. The actual stability ﬁeld, as determined from the condition w < H, is H/D > 0.7266, as shown in ﬁgure 2. Therefore, along the dashed line ρ = 0.9 and in the range 0.7266 < H/D < 1.1785, both cylinder orientations are stable and can coexist. For H/D > 1.1785, certainly the case for the iceberg in ﬁgure 1, the equilibrium orientation is intrinsically unstable and does not occur in nature.

Additional resources ‣ D. S. Dugdale, “Stability of a ﬂoating cylinder,” Int. J. Eng. Sci. 42, 691 (2004). ‣ E. N. Gilbert, “How things ﬂoat,” Amer. Math. Monthly 98, 201 (1991). ‣ J. F. Nye, J. R. Po"er, “The use of catastrophe theory to analyse the stability and toppling of icebergs,” Ann. Glaciol. 1, 49 (1980). ‣ J. C. Burton et al., “Laboratory investigations of iceberg capsize dynamics, energy dissipations and tsunamigenesis,” J. Geophys. Res. Earth Surf. 117, F01007 (2012). PT

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0

0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 LENGTH/DIAMETER ( / )HD

()ρ

DENSITY OF FLOATING SOLID

DENSIT

Y OF SURROUNDING FLU

ID HD/ = 0.7266 HD/ = 1.1785

HD/ = 0.5 Domain I

HD/ = 0.9 Domain IV

HD/ = 1.3 Domain II

D

D [Annotation 4]

DD H H HH

IIIIII

IV

IV

FIGURE 2. DOMAINS OF STABILITY FOR FLOATING CYLINDERS. A plot of four stability domains is shown as a function of a cylinder’s shape H/D and the solid-to-liquid density ratio ρ. Each domain is characterized by the equilibrium orientation in which a cylinder will float. The dotted line at the density ratio ρ = 0.9 corresponds to ice floating in water. Illustrations of stable cylinder orientations in domains I, II, and IV at loci intersected by ρ =0.9 are shown above the graph; their submerged roots are shaded and their above-water tips unshaded. An ice cylinder will float with its rotational axis perpendicular to the water surface when H/D < 0.7266, and with its rotational axis parallel to the surface when H/D > 1.1785. In the range 0.7266 < H/D < 1.1785, both equilibrium orientations can coexist. (Adapted from [Annotation 6] D. S. Dugdale, Int. J. Eng. Sci. 42, 691, 2004.)

---

Source: [Fermat's Library](https://fermatslibrary.com/) — https://fermatslibrary.com/s/tip-of-the-iceberg. More annotated papers: https://fermatslibrary.com/llms.txt
