# How to Share a Secret

> An annotated edition of this paper on Fermat's Library, where scientists and readers explain its ideas, equations and history in the margins. Annotated edition: https://fermatslibrary.com/s/how-to-share-a-secret

- **Authors:** Adi Shamir
- **Published:** 1979
- **Topic:** Computer Science
- **Original:** http://courses.csail.mit.edu/6.857/2016/files/L07-Shamir-HotToShareASecret.pdf
- **Pages:** 2
- **Annotations:** 6 comments in 6 threads
- **Featured:** Fermat's Library Journal Club
- **Annotated edition:** https://fermatslibrary.com/s/how-to-share-a-secret

## Annotations

### Annotation 1 (page 1)

Beside the passage: “Adi Shamir Massachusetts Institute of Technology”

**Annotation** by João Batalha (2016-06-20):

> The author of this paper is [Adi Shamir](https://en.wikipedia.org/wiki/Adi_Shamir) an Israeli cryptographer. Shamir is one of the most important and prolific cryptographers of our age. Shamir received a BSc in Mathematics from the Tel Aviv University in 1973 and a PhD in Computer Science from the Weismann Institute in Rehovot, Israel in 1977. He did research at MIT from 1977 to 1980 and there he co-invented the **RSA** public key encryption algorithm (the S in RSA stands for Shamir). In 2002 he was awarded the Turing Award.
> ![adi](http://i.imgur.com/Zfp8AAm.jpg)

### Annotation 2 (page 1)

Beside the passage: “Adi Shamir Massachusetts Institute of Technology”

**Annotation** by João Batalha (2016-06-20):

> In the scientists and cabinet example:
> - $n = 11$ Number of scientists
> - $k = 6$ Threshold of scientists needed to be present in order to open the safe

### Annotation 3 (page 1)

Beside the passage: “completely undetermined (in the sense that all its possible values are equally likely). Such a scheme is called a (k, n) threshold scheme. Efficient threshold schemes can be very helpful in the management of cryptographic keys. In order to protect data we can encrypt it, but in order to protect the encryption key we …”

**Annotation** by João Batalha (2016-06-20):

> It is important to note that the security of such threshold schemes is dependent on each of the pieces $D_{i}$  being held by different entities that are at least to an extent somewhat independent from each other. Say if you are using a threshold scheme to activate a nuclear arsenal, and all of the generals involved in the threshold scheme live in the same block, it would be easier for an attacker to compromise such scheme.

### Annotation 4 (page 1)

Beside the passage: “Eleven scientists are working on a secret project. They wish to lock up the documents in a cabinet so that the cabinet can be opened if and only if six or more of the scientists are present. What is the smallest number of locks needed? What is the smallest number of keys to the locks each scientist must carry? It is …”

**Annotation** by João Batalha (2016-06-20):

> Another good example would be:
>
> You have a nuclear arsenal and there is a key that activates the arsenal. That key is going to be shared amongst 8 high ranking generals. You want to make sure at least 4 of your 8 high ranking generals are present in order to activate the nuclear arsenal. This way you can afford to loose up to 4 generals and still be able to use the nuclear arsenal and, at the same time, even if one general goes crazy and decides to activate the nuclear arsenal himself he can’t do it (he would need the support of 3 other generals).
>
> The question is:
>
> How do you go about sharing / splitting the key that activates the nuclear arsenal?

### Annotation 5 (page 1)

Beside the passage: “In other applications the tradeoff is not between secrecy and reliability, but between safety and convenience of use. Consider, for example, a company that digitally signs all its checks (see RSA [5]). If each executive is given a copy of the company's secret signature key, the system is convenient but easy to misuse. …”

**Annotation** by João Batalha (2016-06-20):

> A combinatorial argument for this would be:
>
> We need a *lock for each possible combination of 6 scientists out of the 11 total*:
> $$ \dbinom{11}{6} = 462\ locks $$
> Each scientist should have the keys for all the locks that correspond to a combination of scientists in which he is included. That is:
> $$ \dbinom{10}{5} = 252\ keys $$
> *Each scientist therefore gets exactly 252 keys*. Therefore, if you get 6 scientists together, they will be able to open all the locks as each one of the locks will correspond to a combination of scientists in which at least one of the present 6 is included. If you get just 5 scientists (or less) they will not be able to open some of the locks - one lock will correspond to the combination of the 6 remaining scientists that are not present.

### Annotation 6 (page 2)

Beside the passage: “Our scheme is based on polynomial' interpolation: given k points in the 2-dimensional plane (x,, y,) ..... (xk, Yk). with distinct xi's , there is one and only one polynomial q(x) of degree k - 1 such that q(x) =yi for all i. Without loss of generality, we can assume that the data D is (or can be made) a number. To …”

**Annotation** by João Batalha (2016-06-20):

> The main idea is:
> - $2$ points determine a line
> - $3$ points determine a quadratic
> - $\ldots$
> - $k$ points determine a degree $(k-1)$ curve
>
> The secret is the $y$ intercept. Let’s look at an example for a line.
>
> Alice wants to split a secret between Bob, Carlos and David.
> The secret is 8.
> Alice chooses a secret line $f$ such that $f(0) = 8$ and gives Bob, Carlos and David one point along the curve (other than $(0,8)$).
> ![plot](http://i.imgur.com/peMnbUt.png)
> Given just one point, Bob, Carlos and David cannot know what the secret function is and therefore have no way of finding out what the secret is. However if Bob and Carlos get together they can interpolate $f$ and easily compute the secret value $f(0) = 8$.
>
> This is a $(2, 3)$ threshold system. You have 3 participants ($n$) and you need at least 2 ($k$) in order to get the secret.

## Full text

Extracted from the PDF. [Annotation N] marks where each annotation above sits.

#### Page 1

Programming R. Rivest Techniques Editor

How to Share a Secret

Adi Shamir [Annotation 1] [Annotation 2] Massachusetts Institute of Technology

In this paper we show how to divide data D into n pieces in such a way that D is easily reconstructable from any k pieces, but even complete knowledge of k - 1 pieces reveals absolutely no information about D. This technique enables the construction of robust key management schemes for cryptographic systems that can function securely and reliably even when misfortunes destroy half the pieces and security breaches expose all but one of the remaining pieces.

Key Words and Phrases: cryptography, key management, interpolation

CR Categories: 5:39, 5.6

1. Introduction

In [4], Liu considers the following problem:

Eleven scientists are working on a secret project. They wish to lock up the documents in a cabinet so that the cabinet can be opened if [Annotation 4] and only if six or more of the scientists are present. What is the smallest number of locks needed? What is the smallest number of keys to the locks each scientist must carry? It is not hard to show that the minimal solution uses 462 locks and 252 keys per scientist. These numbers are clearly impractical, and they become exponentially worse when the number of scientists increases.

In this paper we generalize the problem to one in which the secret is some data D (e.g., the safe combina-

Permission to copy without fee all or part of this material is granted provided that the copies are not made or distributed for direct commercial advantage, the ACM copyright notice and the title of the publication and its date appear, and notice is given that copying is by permission of the Association for Computing Machinery. To copy otherwise, or to republish, requires a fee and/or specific permission.

Author's present address: A. Shamir, Laboratory for Computer Science, Massachusetts Institute of Technology, Cambridge, MA 02139.

This research was supported by the Office of Naval Research under contract no. N00014-76-C-0366. @1979 ACM 0001-0782/79/1100-0612 $00.75.

tion) and in which nonmechanical solutions (which manipulate this data) are also allowed. Our goa ! is to divide D into n pieces D, ..... D n in such a way that: (1) knowledge of any k or more D i pieces makes D

easily computable; (2) knowledge of any k- 1 or fewer Di pieces leaves D

completely undetermined (in the sense that all its possible values are equally likely). Such a scheme is called a (k, n) threshold scheme. Efficient threshold schemes can be very helpful in the management of cryptographic keys. In order to protect data we can encrypt it, but in order to protect the encryption key we need a different method (further encryptions change the problem rather than solve it). The most secure key management scheme keeps the key in a single, well-guarded location (a computer, a human brain, or a safe). This scheme is highly unreliable since a single misfortune (a computer breakdown, sudden death, or sabotage) can make the information inaccessible. An obvious solution is to store multiple copies of the key at different locations, but this increases the danger of security breaches (computer penetration~ betrayal, or human errors). By using a (k, n) threshold scheme with n = 2k- 1 we get a very robust key management scheme: We can recover the original key even when [n/2J = k- 1 of the n pieces are destroyed, but our opponents cannot reconstruct the key even when security breaches expose [n/21 = k- 1 of the remaining k pieces. [Annotation 3]

In other applications the tradeoff is not between secrecy and reliability, but between safety and convenience of use. Consider, for example, a company that digitally signs all its checks (see RSA [5]). If each executive is given a copy of the company's secret signature key, the system is convenient but easy to misuse. If the cooperation of all the company's executives is necessary in order to sign each check, the system is safe but inconvenient. The standard solution requires at least three signatures per check, and it is easy to implement with a (3, n) threshold scheme. Each executive is given a small magnetic card with one Di piece, and the company's signature generating device accepts any three of them in order to generate (and later destroy) a temporary copy of [Annotation 5] the actual signature key D. The device does not contain any secret information and thus it need not be protected against inspection. An unfaithful executive must have at least two accomplices in order to forge the company's signature in this scheme.

Threshold schemes are ideally suited to applications in which a group of mutually suspicious individuals with conflicting interests must cooperate. Ideally we would like the cooperation to be based on mutual consent, but the veto power this mechanism gives to each member can paralyze the activities of the group. By properly choosing the k and n parameters we can give any sufficiently large majority the authority to take some action while giving any sufficiently large minority the power to block it.

612 Communications November 1979 of Volume 22 the ACM Number 11

#### Page 2

2. A Simple (k, n) Threshold Scheme

Our scheme is based on polynomial' interpolation: [Annotation 6] given k points in the 2-dimensional plane (x,, y,) ..... (xk, Yk). with distinct xi's , there is one and only one polynomial q(x) of degree k - 1 such that q(x) =yi for all i. Without loss of generality, we can assume that the data D is (or can be made) a number. To divide it into pieces D~, we pick a random k-1 degree polynomial q(x)=ao+alx+ ... ak_ixk-~ in which ao=D , and evaluate:

D~ = q(1) ..... D i = q(i) ..... D n = q(n).

Given any subset of k of these D~ values (together with their identifying indices), we can find the coefficients of q(x) by interpolation, and then evaluate D=q(O). Knowledge of just k- 1 of these values, on the other hand, does not suffice in order to calculate D.

To make this claim more precise, we use modular arithmetic instead of real arithmetic. The set of integers modulo a prime number p forms a field in which interpolation is possible. Given an integer valued data D, we pick a prime p which is bigger than both D and n. The coefficients a~ ..... ak_~ in q(x) are randomly chosen from a uniform distribution over the integers in [0, p), and the values D~ ..... Dn are computed modulo p.

Let us now assume that k-1 of these n pieces are revealed to an opponent. For each candidate value D' in [0, p) he can construct one and only one polynomial q '(x) of degree k- 1 such that q '(0) =D' and q '(0 =D~ for the k- 1 given arguments. By construction, these p possible polynomials are equally likely, and thus there is abolutely nothing the opponent can deduce about the real value of D.

Efficient O(n log 2 n) algorithms for polynomial evaluation and interpolation are discussed in [1] and [3], but even the straightforward quadratic algorithms are fast enough for practical key management schemes. If the number D is long, it is advisable to break it into shorter blocks of bits (which are handled separately) in order to avoid multiprecision arithmetic operations. The blocks cannot be arbitrarily short, since the smallest usable value of p is n + 1 (there must be at least n + 1 distinct arguments in [0, p) to evaluate q(x) at). However, this is not a severe limitation since sixteen bit modulus (which can be handled by a cheap sixteen bit arithmetic unit) suffices for applications with up to 64,000 D~ pieces.

Some of the useful properties of this (k, n) threshold scheme (when compared to the mechanical locks and keys solutions) are:

(1) The size of each piece does not exceed the size of the

original data. (2) When k is kept fixed, D~ pieces can be dynamically

added or deleted (e.g., when executives join or leave

the company) without affecting the other D i pieces. (A piece is deleted only when a leaving executive makes it completely inaccessible, even to himself.) (3) It is easy to change the D i pieces without changing

the original data D--all we need is a new polynomial q(x) with the same free term. A frequent change of this type can greatly enhance security since the pieces exposed by security breaches cannot be accumulated unless all of them are values of the same edition of the q(x) polynomial. (4) By using tuples of polynomial values as Di pieces, we

can get a hierarchical scheme in which the number of pieces needed to determine D depends on their importance. For example, if we give the company's president three values of q(x), each vice-president two values of q(x), and each executive one value of q(x), then a (3, n) threshold scheme enables checks to be signed either by any three executives, or by any two executives one of whom is a vice-president, or by the president alone.

A different (and somewhat less efficient) threshold scheme was recently developed by G.R. Blakley [2].

Received April 1979; revised September 1979

References 1. Aho, A., Hopcroft, J., and Ullman, J. The Design and Analysis of Computer AIgorithms. Addison-Wesley, Reading, Mass., 1974. 2. Blakley, G.R. Safeguarding cryptographic keys. Proc. AFIPS 1979 NCC, Vol. 48, Arlington, Va., June 1979, pp. 313-317. 3. Knuth, D. The Art of Computer Programming, Vol. 2: SeminumericalAlgorithms. Addison-Wesley, Reading, Mass., 1969. 4. Liu, C.L. Introduction to Combinatorial Mathematics. McGraw- Hill, New York, 1968. 5. Rivest, R., Shamir, A., and Adleman, L. A method for obtaining digital signatures and public-key cryptosystems. Comm. A CM 21, 2 (Feb. 1978), 120-126.

LThe polynomials can be replaced by any other collection of functions which are easy to evaluate and to interpolate.

613 Communications November 1979 of Volume 22 the ACM Number 11

---

Source: [Fermat's Library](https://fermatslibrary.com/) — https://fermatslibrary.com/s/how-to-share-a-secret. More annotated papers: https://fermatslibrary.com/llms.txt
