# How Airplanes Fly: A Physical Description of Lift

> An annotated edition of this paper on Fermat's Library, where scientists and readers explain its ideas, equations and history in the margins. Annotated edition: https://fermatslibrary.com/s/how-airplanes-fly-a-physical-description-of-lift

- **Authors:** David Anderson and Scott Eberhardt
- **Published:** 1999
- **Topic:** Physics
- **Original:** https://s3-us-west-1.amazonaws.com/fermatslibrary/uploads%2F1573337426097-lipa7sn6t-c27f1acdb7fda07d22f4392b806193f4%2Ftest.pdf
- **Pages:** 9
- **Annotations:** 19 comments in 18 threads
- **Featured:** Fermat's Library Journal Club
- **Annotated edition:** https://fermatslibrary.com/s/how-airplanes-fly-a-physical-description-of-lift

## Annotations

### Annotation 1 (page 1)

Beside the passage: “David Anderson Fermi National Accelerator Laboratory”

**Annotation** by Micael Oliveira (2019-11-09):

> In order for an airplane to rise and fly in the air, a force must be created that equals or exceeds the force of gravity. This force is called lift.
>
> The popular explanation for lift is based on Bernoulli's principle. This explanation relies on the "principle of equal transit times" - air travelling over and under the wing will do so in the same amount of time.
>
> This explanation falls short when it comes to explain simple things like inverted flight or flat/symmetric wings. This paper provides a general overview of all the effects that contribute to the lift generated by wings and thus provides a better explanation of how planes really fly.
>
> If you are interested in learning more, the authors of this paper also wrote a book describe the phenomenon of flight: [Understanding Flight, by David W. Anderson, Scott Eberhardt](https://www.goodreads.com/book/show/26251943-understanding-flight-second-edition)

### Annotation 2 (page 1)

Beside the passage: “description is useful for understanding ﬂight, and is accessible to all who are curious. Little math is needed to yield an estimate of many phenomena associated with ﬂight. This description gives a clear, intuitive understanding of such phenomena as the power curve, ground eﬀect, and high-speed stalls. However, unlike …”

**Annotation** by Micael Oliveira (2019-11-12):

> **How Do Airplanes Fly?** A short and very interest explanation by Minute Physics:
>
> [![](https://i.imgur.com/j6dkLfB.png)](https://www.youtube.com/watch?v=Gg0TXNXgz-w)

### Annotation 3 (page 1)

Beside the passage: “Students of physics and aerodynamics are taught that airplanes ﬂy as a result of Bernoulli’s principle, which says that if air speeds up the pressure is lowered. Thus a wing generates lift because the air goes faster over the top creating a region of low pressure, and thus lift. This explanation usually satisﬁes the …”

**Annotation** by Micael Oliveira (2019-11-09):

> Bernoulli's Principle states that within a horizontal flow of fluid, points of higher fluid speed will have less pressure than points of slower fluid speed - an increase in velocity leads to an decrease in pressure.
>
> Bernoulli's equation can be considered as a statement of the conservation of energy for flowing fluids and can be written as follows:
>
> $$P+\dfrac{1}{2}\rho v^2+\rho gh=\text{constant}$$
>
> Applying this principle to the wing of an airplane we get that the air flowing over an airfoil will decrease in pressure. The difference in pressure between the top surface and the bottom surface creates a net pressure force in the upward direction. This pressure force is lift.
>
> ![incorrect theory](https://i.stack.imgur.com/24VM8.gif)

### Annotation 4 (page 1)

Beside the passage: “The second description we will call the Popular Explanation which is based on the Bernoulli principle. The primary advantage of this description is that it is easy to understand and has been taught for many years. Because of its simplicity, it is used to describe lift in most ﬂight training manuals. The major …”

**Annotation** by Micael Oliveira (2019-11-09):

> The principle of **"equal transit times"** states that the air going around a wing, whether going over or under, must do so in equal time. For a curved wing the air has to travel farther over the top of the wing it has to go faster which produces  a difference in pressure that will generate lift (Bernoulli’s principle).
>
> The notion that the air passing above and below the wing must do so in equal time is a common misconception that is usually used to explain how wings work. For a detailed and visual explanation of how wings generate lift see the video below **"How Does A Wing Actually Work?"**.
>
> [![](https://i.imgur.com/8ElKgOl.png)](https://www.youtube.com/watch?v=aFO4PBolwFg)

### Annotation 5 (page 2)

Beside the passage: “FIG. 2: Simulation of the airﬂow over a wing in a wind tunnel, with colored "smoke" to show the acceleration and deceleration of the air.”

**Annotation** by Micael Oliveira (2019-11-10):

> The air going over the top of the wing reaches the trailing edge before the air that goes under the wing. The air that passed under the wing has a somewhat retarded velocity compared to the velocity of air some distance from the wing. See the video below for a better visualization of this effect:
>
> [![](https://i.imgur.com/nfWlbVN.png)](https://www.youtube.com/watch?v=UqBmdZ-BNig)

### Annotation 6 (page 2)

Beside the passage: “FIG. 1: Shape of wing predicted by principle of equal transit time”

**Annotation** by Micael Oliveira (2019-11-09):

> If the principle of equal transit times and thus the Bernoulli effect were the only contributing factors to generate lift than the air would have to travel a distance over the wing $L_{over}$ that is 50% longer than that traveled under the wing $L_{under}$ which would produce "weirdly" shaped wings.

### Annotation 7 (page 2)

Beside the passage: “If we look at the wing of a typical small plane, which has a top surface that is 1.5 - 2.5% longer than the bottom, we discover that a Cessna 172 would have to ﬂy at over 400 mph to generate enough lift. Clearly, something in this description of lift is ﬂawed.”

**Annotation** by rlaneburton1@gmail.com (2019-11-12):

> "the wing of a typical small plane, whichhas a top surface that is 1.5 - 2.5% longer than the bottom," is incorrect.  As the angle of attack increases, the leading edge stagnation point moves rearward along the underside of the wing, which lengthens the distance over the top and shortens the distance along the underside.  Thus Fig. 1 is distorted.

**Reply** by Micael Oliveira (2019-11-13):

> **@Prof. Rod Burton** That's correct. The authors are simply assuming no angle of attack and the principle of equal transit times. Here is an interesting visualization showing the airflow over and under the wing with increasing angle of attack - one can also see the change in the leading edge stagnation point.
>
> ![increasing AOA](https://im6.ezgif.com/tmp/ezgif-6-eea223f81b25.gif)

### Annotation 8 (page 2)

Beside the passage: “The popular explanation also implies that inverted ﬂight is impossible. It certainly does not address acrobatic airplanes, with symmetric wings (the top and bottom surfaces are the same shape), or how a wing adjusts for the great changes in load such as when pulling out of a dive or in a steep turn.”

**Annotation** by Micael Oliveira (2019-11-09):

> > The popular explanation also implies that inverted flight is impossible. It certainly does not address acrobatic airplanes, with symmetric wings (the top and bottom surfaces are the same shape)

### Annotation 9 (page 3)

Beside the passage: “As Newton’s laws suggest, the wing must change something of the air to get lift. Changes in the air’s momentum will result in forces on the wing. To generate lift a wing must divert air down, lots of air.”

**Annotation** by Micael Oliveira (2019-11-12):

> The wing produces lift by diverting air down. The work produced by the wing when it diverts the air downs produces lift. The lift produced by a wing $L_{wing}$ is the proportional to the product of the amount of air $V_{air}$ diverted down and the speed of that air $v_{air}$:
>
> $$L_{wing} \propto V_{air} \cdot v_{air}$$

### Annotation 10 (page 4)

Beside the passage: “FIG. 6: Downwash and wing vortices in the fog. (Photographer Paul Bowen, courtesy of Cessna Aircraft, Co.)”

**Annotation** by Micael Oliveira (2019-11-10):

> ![updownwash](https://i.imgur.com/E8b7xhw.jpg)
>
> **Upwash**
> When a plane is flying the air approaches the front of wings from below due to the wings angle of attack and is. This air is diverted upwards: upwash.
>
> **Downwash**
> The air splits around the wing and it will leave the wing with a downward angle. This downward-traveling air is the downwash and is the action that creates lift as its reaction.
>
> There has been a change in the air after passing over the wing. Lift is created via a force acting on the air and a reaction force acting on the wing.
>
> A better visualization of the downwash and upwash zones can be seen below.
> ![upwashdownwash](https://i.imgur.com/IGiLhH2.jpg)

### Annotation 11 (page 4)

Beside the passage: “One observation that can be made from ﬁgure 7 is that the top surface of the wing does much more to move the air than the bottom. So the top is the more critical surface. Thus, airplanes can carry external stores, such as drop tanks, under the wings but not on top where they would interfere with lift. That is also why …”

**Annotation** by Micael Oliveira (2019-11-10):

> > One observation that can be made from figure 7 is that the top surface of the wing does much more to move the air than the bottom. So the top is the more critical surface. Thus, airplanes can carry external stores, such as drop tanks, under the wings but not on top where they would interfere with lift. That is also why wing struts under the wing are common but struts on the top of the wing have been historically rare. A strut, or any obstruction, on the top of the wing would interfere with the lift.

### Annotation 12 (page 5)

Beside the passage: “the water to wrap around the glass as is shown in ﬁgure 8. This tendency of ﬂuids to follow a curved surface is known as the Coanda eﬀect. From Newton’s ﬁrst law we know that for the ﬂuid to bend there must be a force acting on it. From Newton’s third law we know that the ﬂuid must put an equal and opposite force on …”

**Annotation** by Micael Oliveira (2019-11-10):

> **The Coanda effect** was first discovered by a mathematician and engineer named Henri Coanda in 1910. Coanda observed that when air was ejected from a rectangular nozzle, it would attach itself to an inclined flat plate connected to the nozzle exit. He stated that *“when a jet of fluid is passed over a curved surface, it bends to follow the surface, entraining large amounts of air as it does so”*. He applied this principle to a series of different surfaces, each at a sharp angle to the previous one, and succeeded in turning flows through angles as large as 180$^{\circ}$.
>
> He was the first to recognize the practical application of the phenomenon in aircraft design.
>
> ![coanda effect](https://i.imgur.com/v42vZqp.gif)

### Annotation 13 (page 5)

Beside the passage: “Why should a ﬂuid follow a curved surface? The answer is viscosity: the resistance to ﬂow which also gives the air a kind of "stickiness." Viscosity in air is very small but it is enough for the air molecules to want to stick to the surface. The relative velocity between the surface and the nearest air molecules is …”

**Annotation** by Vyaas Gururajan (2020-01-04):

> I'm not sure this is right. Flow bends around objects even in the absence of viscosity. What determines bending is actually pressure gradients that develop due to local accelerations and decelerations of the fluid.

### Annotation 14 (page 5)

Beside the passage: “There are many types of wing: conventional, symmetric, conventional in inverted ﬂight, the early biplane wings that looked like warped boards, and even the proverbial "barn door." In all cases, the wing is forcing the air down, or more accurately pulling air down from above. What all of these wings have in common is …”

**Annotation** by Micael Oliveira (2019-11-10):

> The Angle of attack (also known as AOA) is the angle between the oncoming air or relative wind and a reference line on the airplane or wing. See a few examples below.
>
> ![aoa](https://i.imgur.com/qlwNZKi.jpg)
> Fig: Illustartion of 3 different angles of attack: 5$^{\circ}$, 10$^{\circ}$, 20$^{\circ}$

### Annotation 15 (page 7)

Beside the passage: “vertical velocity of the air, it too is reduced by half. Thus, the lifting eﬃciency of a wing is proportional to one over the length of the wing. The longer the wing the less induced power required to produce the same lift, though this is achieved with an increase in parasitic drag. Low speed airplanes are aﬀected …”

**Annotation** by Micael Oliveira (2019-11-10):

> **The induced power** is the power required to redirect the air and generate lift.
>
> **The parasitic power** is the power needed to overcome the drag when an object is moving through a fluid (in the case of a plane that fluid is the atmosphere). The power required to overcome the parasitic drag is given by:
>
> $P_d = \mathbf{F}_d \cdot \mathbf{v} = \tfrac12 \rho v^3 A C_d$
>
> where $F_{D}$ is the drag force, $\rho$  is the density of the fluid $v$ is the speed of the object relative to the fluid, $A$ is the cross sectional area, and $C_{D}$ is the drag coefficient.
>
> At cruise, the total power requirement is dominated by parasitic power since it is proportional to $v^3$.
>
> The total power is the sum of the induced and parasitic power.

### Annotation 16 (page 7)

Beside the passage: “vertical velocity of the air, it too is reduced by half. Thus, the lifting eﬃciency of a wing is proportional to one over the length of the wing. The longer the wing the less induced power required to produce the same lift, though this is achieved with an increase in parasitic drag. Low speed airplanes are aﬀected …”

**Annotation** by Micael Oliveira (2019-11-10):

> In order to lower the induced power needed for lift one needs to improve the efficiency of a wing. The easiest way to increase the efficiency of a wing is to increase the amount of air diverted by the wing. If the wing is able to divert more air, then the vertical velocity of the air is reduced for the same lift and so is the induced power. An "easy" way to accomplish this is by increasing the size of the wing.
>
> At low speeds induced drag dominates so for example sailplanes have longer wings and at high speeds parasitic drag dominates reason why high speed fighters have shorter wings.

### Annotation 17 (page 8)

Beside the passage: “The increase in the angle of attack with increased load has a downside other than just the need for more power. As shown in ﬁgure 9 a wing will eventually stall when the air can no longer follow the upper surface, that is, when the critical angle is reached. Figure 14 shows the angle of attack as a function of …”

**Annotation** by Micael Oliveira (2019-11-12):

> Visualization of the airflow with increasing angle of attack.
>
> When the angle of attack is too high  the airflow over most of the top of the wing has separated and there is **no noticeable downwash thus there is no lift and the wing stalls**.
>
> ![increasing AOA](https://im6.ezgif.com/tmp/ezgif-6-eea223f81b25.gif)

### Annotation 18 (page 8)

Beside the passage: “One might ask what the downwash from a wing looks like. The downwash comes oﬀ the wing as a sheet and is related to the details of the load distribution on the wing. Figure 15 shows, through condensation, the distribution of lift on an airplane during a high-g maneuver. From the ﬁgure one can see that the distribution …”

**Annotation** by Micael Oliveira (2019-11-10):

> At the end of the wing the lift goes to zero very rapidly and there is some airflow around the wingtip. This causes the tightest curl in the wing vortex, creating the wingtip vortex. See below.
>
> ![wingtip vortices](https://i.imgur.com/VUbQB0Y.mp4)

## Full text

Extracted from the PDF. [Annotation N] marks where each annotation above sits.

#### Page 1

How Airplanes Fly: A Physical Description of Lift

David Anderson Fermi National Accelerator Laboratory [Annotation 1]

Batavia IL 60510

dfa@fnal.gov

Scott Eberhardt Dept. of Aeronautics and Astronautics

University of Washington

Seattle WA 91895-2400 scott@aa.washington.edu

Originally published in February 1999

I. INTRO

Almost everyone today has ﬂown in an airplane. Many ask the simple question "what makes an airplane ﬂy"? The answer one frequently gets is misleading and often just plain wrong. We hope that the answers provided here will clarify many misconceptions about lift and that you will adopt our explanation when explaining lift to others. We are going to show you that lift is easier to understand if one starts with Newton rather than Bernoulli. We will also show you that the popular explanation that most of us were taught is misleading at best and that lift is due to the wing diverting air down.

Let us start by deﬁning three descriptions of lift commonly used in textbooks and training manuals. The ﬁrst we will call the Mathematical Aerodynamics Description which is used by aeronautical engineers. This description uses complex mathematics and/or computer simulations to calculate the lift of a wing. These are design tools which are powerful for computing lift but do not lend themselves to an intuitive understanding of ﬂight.

The second description we will call the Popular Explanation which is based on the Bernoulli principle. The primary advantage of this description is that it is easy to understand and has been taught for many years. Because of its simplicity, it is used to describe lift in most ﬂight training manuals. The major disadvantage is that [Annotation 4] it relies on the "principle of equal transit times" which is wrong. This description focuses on the shape of the wing and prevents one from understanding such important phenomena as inverted ﬂight, power, ground eﬀect, and the dependence of lift on the angle of attack of the wing.

The third description, which we are advocating here, we will call the Physical Description of lift. This description is based primarily on Newton’s laws. The physical

description is useful for understanding ﬂight, and is ac- [Annotation 2] cessible to all who are curious. Little math is needed to yield an estimate of many phenomena associated with ﬂight. This description gives a clear, intuitive understanding of such phenomena as the power curve, ground eﬀect, and high-speed stalls. However, unlike the mathematical aerodynamics description, the physical description has no design or simulation capabilities.

II. THE POPULAR EXPLANATION OF LIFT

Students of physics and aerodynamics are taught that [Annotation 3] airplanes ﬂy as a result of Bernoulli’s principle, which says that if air speeds up the pressure is lowered. Thus a wing generates lift because the air goes faster over the top creating a region of low pressure, and thus lift. This explanation usually satisﬁes the curious and few challenge the conclusions. Some may wonder why the air goes faster over the top of the wing and this is where the popular explanation of lift falls apart.

In order to explain why the air goes faster over the top of the wing, many have resorted to the geometric argument that the distance the air must travel is directly related to its speed. The usual claim is that when the air separates at the leading edge, the part that goes over the top must converge at the trailing edge with the part that goes under the bottom. This is the so-called "principle of equal transit times".

As discussed by Gail Craig (Stop Abusing Bernoulli! How Airplanes Really Fly, Regenerative Press, Anderson, Indiana, 1997), let us assume that this argument were true. The average speeds of the air over and under the wing are easily determined because we can measure the distances and thus the speeds can be calculated. From Bernoulli’s principle, we can then determine the pressure

#### Page 2

2

forces and thus lift. If we do a simple calculation we would ﬁnd that in order to generate the required lift for a typical small airplane, the distance over the top of the wing must be about 50% longer than under the bottom. Figure 1 shows what such an airfoil would look like. Now, imagine what a Boeing 747 wing would have to look like!

FIG. 1: Shape of wing predicted by principle of equal transit [Annotation 6] time

If we look at the wing of a typical small plane, which [Annotation 7] has a top surface that is 1.5 - 2.5% longer than the bottom, we discover that a Cessna 172 would have to ﬂy at over 400 mph to generate enough lift. Clearly, something in this description of lift is ﬂawed.

But, who says the separated air must meet at the trailing edge at the same time? Figure 2 shows the airﬂow over a wing in a simulated wind tunnel. In the simulation, colored smoke is introduced periodically. One can see that the air that goes over the top of the wing gets to the trailing edge considerably before the air that goes under the wing. In fact, close inspection shows that the air going under the wing is slowed down from the "freestream" velocity of the air. So much for the principle of equal transit times.

The popular explanation also implies that inverted ﬂight is impossible. It certainly does not address acrobatic airplanes, with symmetric wings (the top and bottom surfaces are the same shape), or how a wing adjusts [Annotation 8] for the great changes in load such as when pulling out of a dive or in a steep turn.

So, why has the popular explanation prevailed for so long? One answer is that the Bernoulli principle is easy to understand. There is nothing wrong with the Bernoulli principle, or with the statement that the air goes faster over the top of the wing. But, as the above discussion suggests, our understanding is not complete with this

FIG. 2: Simulation of the airﬂow over a wing in a wind tunnel, [Annotation 5] with colored "smoke" to show the acceleration and deceleration of the air.

explanation. The problem is that we are missing a vital piece when we apply Bernoulli’s principle. We can calculate the pressures around the wing if we know the speed of the air over and under the wing, but how do we determine the speed?

Another fundamental shortcoming of the popular explanation is that it ignores the work that is done. Lift requires power (which is work per time). As will be seen later, an understanding of power is key to the understanding of many of the interesting phenomena of lift.

III. NEWTON’S LAWS AND LIFT

So, how does a wing generate lift? To begin to understand lift we must return to high school physics and review Newton’s ﬁrst and third laws. (We will introduce Newton’s second law a little later.) Newton’s ﬁrst law states a body at rest will remain at rest, and a body in motion will continue in straight-line motion unless subjected to an external applied force. That means, if one sees a bend in the ﬂow of air, or if air originally at rest is accelerated into motion, there is a force acting on it. Newton’s third law states that for every action there is an equal and opposite reaction. As an example, an object sitting on a table exerts a force on the table (its weight) and the table puts an equal and opposite force on the object to hold it up. In order to generate lift a wing must do something to the air. What the wing does to the air is the action while lift is the reaction.

Let’s compare two ﬁgures used to show streams of air (streamlines) over a wing. In ﬁgure 3 the air comes straight at the wing, bends around it, and then leaves straight behind the wing. We have all seen similar pictures, even in ﬂight manuals. But, the air leaves the wing exactly as it appeared ahead of the wing. There is no net

#### Page 3

3

action on the air so there can be no lift! Figure 4 shows the streamlines, as they should be drawn. The air passes over the wing and is bent down. The bending of the air is the action. The reaction is the lift on the wing.

FIG. 3: Common depiction of airﬂow over a wing. This wing has no lift.

FIG. 4: True airﬂow over a wing with lift, showing upwash and downwash.

IV. THE WING AS A PUMP

As Newton’s laws suggest, the wing must change some- [Annotation 9] thing of the air to get lift. Changes in the air’s momentum will result in forces on the wing. To generate lift a wing must divert air down, lots of air.

The lift of a wing is equal to the change in momentum of the air it diverts down. Momentum is the product of mass and velocity. The lift of a wing is proportional to the amount of air diverted down times the downward velocity of that air. Its that simple. (Here we have used an alternate form of Newton’s second law that relates the acceleration of an object to its mass and to the force on it, F = ma) For more lift the wing can either divert more air (mass) or increase its downward velocity. This downward velocity behind the wing is called "downwash". Figure 5 shows how the downwash appears to the pilot (or in a wind tunnel). The ﬁgure also shows how the downwash appears to an observer on the ground watching the wing go by. To the pilot the air is coming oﬀ the wing at roughly the angle of attack. To the observer on the ground, if he or she could see the air, it would be coming

oﬀ the wing almost vertically. The greater the angle of attack, the greater the vertical velocity. Likewise, for the same angle of attack, the greater the speed of the wing the greater the vertical velocity. Both the increase in the speed and the increase of the angle of attack increase the length of the vertical arrow. It is this vertical velocity that gives the wing lift.

FIG. 5: True airﬂow over a wing with lift, showing upwash and downwash.

As stated, an observer on the ground would see the air going almost straight down behind the plane. This can be demonstrated by observing the tight column of air behind a propeller, a household fan, or under the rotors of a helicopter, all of which are rotating wings. If the air were coming oﬀ the blades at an angle the air would produce a cone rather than a tight column. If a plane were to ﬂy over a very large scale, the scale would register the weight of the plane.

If we estimate the average vertical component of the downwash of a Cessna 172 traveling at 110 knots to be about 9 knots, then to generate the needed 2,300 lbs of lift the wing pumps a whopping 2.5 ton/sec of air! In fact, as will be discussed later, this estimate may be as much as a factor of two too low. The amount of air pumped down for a Boeing 747 to create lift for its roughly 800,000 pounds takeoﬀ weight is incredible indeed.

Pumping, or diverting, so much air down is a strong argument against lift being just a surface eﬀect as implied by the popular explanation. In fact, in order to pump 2.5 ton/sec the wing of the Cessna 172 must accelerate all of the air within 9 feet above the wing. (Air weighs about 2 pounds per cubic yard at sea level.) Figure 6 illustrates the eﬀect of the air being diverted down from a wing. A huge hole is punched through the fog by the downwash from the airplane that has just ﬂown over it.

#### Page 4

4

FIG. 6: Downwash and wing vortices in the fog. (Photogra- [Annotation 10] pher Paul Bowen, courtesy of Cessna Aircraft, Co.)

So how does a thin wing divert so much air? When the air is bent around the top of the wing, it pulls on the air above it accelerating that air down, otherwise there would be voids in the air left above the wing. Air is pulled from above to prevent voids. This pulling causes the pressure to become lower above the wing. It is the acceleration of the air above the wing in the downward direction that gives lift. (Why the wing bends the air with enough force to generate lift will be discussed in the next section.)

As seen in ﬁgure 4, a complication in the picture of a wing is the eﬀect of "upwash" at thae leading edge of the wing. As the wing moves along, air is not only diverted down at the rear of the wing, but air is pulled up at the leading edge. This upwash actually contributes to negative lift and more air must be diverted down to compensate for it. This will be discussed later when we consider ground eﬀect.

Normally, one looks at the air ﬂowing over the wing in the frame of reference of the wing. In other words, to the pilot the air is moving and the wing is standing still. We have already stated that an observer on the ground would see the air coming oﬀ the wing almost vertically. But what is the air doing above and below the wing? Figure 7 shows an instantaneous snapshot of how air molecules are moving as a wing passes by. Remember in this ﬁgure the air is initially at rest and it is the wing moving. Ahead

of the leading edge, air is moving up (upwash). At the trailing edge, air is diverted down (downwash). Over the top the air is accelerated towards the trailing edge. Underneath, the air is accelerated forward slightly, if at all.

FIG. 7: Direction of air movement around a wing as seen by an observer on the ground.

In the mathematical aerodynamics description of lift this rotation of the air around the wing gives rise to the "bound vortex" or "circulation" model. The advent of this model, and the complicated mathematical manipulations associated with it, leads to the direct understanding of forces on a wing. But, the mathematics required typically takes students in aerodynamics some time to master.

One observation that can be made from ﬁgure 7 is that the top surface of the wing does much more to move the air than the bottom. So the top is the more critical surface. Thus, airplanes can carry external stores, such as drop tanks, under the wings but not on top where they would interfere with lift. That is also why wing struts under the wing are common but struts on the top [Annotation 11] of the wing have been historically rare. A strut, or any obstruction, on the top of the wing would interfere with the lift.

V. AIR HAS VISCOSITY

The natural question is "how does the wing divert the air down?" When a moving ﬂuid, such as air or water, comes into contact with a curved surface it will try to follow that surface. To demonstrate this eﬀect, hold a water glass horizontally under a faucet such that a small stream of water just touches the side of the glass. Instead of ﬂowing straight down, the presence of the glass causes

#### Page 5

5

the water to wrap around the glass as is shown in ﬁgure 8. This tendency of ﬂuids to follow a curved surface is known as the Coanda eﬀect. From Newton’s ﬁrst law we [Annotation 12] know that for the ﬂuid to bend there must be a force acting on it. From Newton’s third law we know that the ﬂuid must put an equal and opposite force on the object that caused the ﬂuid to bend.vis

FIG. 8: Coanda eﬀect.

Why should a ﬂuid follow a curved surface? The answer is viscosity: the resistance to ﬂow which also gives the air a kind of "stickiness." Viscosity in air is very small but it is enough for the air molecules to want to stick to the surface. The relative velocity between the surface and the nearest air molecules is exactly zero. (That is why one cannot hose the dust oﬀ of a car and why there is dust on the backside of the fans in a wind tunnel.) Just above the surface the ﬂuid has some small velocity. The farther one goes from the surface the faster the ﬂuid is moving until the external velocity is reached (note that [Annotation 13] this occurs in less than an inch). Because the ﬂuid near the surface has a change in velocity, the ﬂuid ﬂow is bent towards the surface. Unless the bend is too tight, the ﬂuid will follow the surface. This volume of air around the wing that appears to be partially stuck to the wing is called the "boundary layer".

VI. LIFT AS A FUNCTION OF ANGLE OF

ATTACK

There are many types of wing: conventional, symmetric, conventional in inverted ﬂight, the early biplane wings that looked like warped boards, and even the proverbial "barn door." In all cases, the wing is forcing the air down, or more accurately pulling air down from above. What all of these wings have in common is an angle of attack with respect to the oncoming air. It is this angle of attack that is the primary parameter [Annotation 14] in determining lift. The lift of the inverted wing can

be explained by its angle of attack, despite the apparent contradiction with the popular explanation involving the Bernoulli principle. A pilot adjusts the angle of attack to adjust the lift for the speed and load. The popular explanation of lift which focuses on the shape of the wing gives the pilot only the speed to adjust.

To better understand the role of the angle of attack it is useful to introduce an "eﬀective" angle of attack, deﬁned such that the angle of the wing to the oncoming air that gives zero lift is deﬁned to be zero degrees. If one then changes the angle of attack both up and down one ﬁnds that the lift is proportional to the angle. Figure 9 shows the coeﬃcient of lift (lift normalized for the size of the wing) for a typical wing as a function of the eﬀective angle of attack. A similar lift versus angle of attack relationship is found for all wings, independent of their design. This is true for the wing of a 747 or a barn door. The role of the angle of attack is more important than the details of the airfoil’s shape in understanding lift.

FIG. 9: Coeﬃcient of lift versus the eﬀective angle of attack.

Typically, the lift begins to decrease at an angle of attack of about 15 degrees. The forces necessary to bend the air to such a steep angle are greater than the viscosity of the air will support, and the air begins to separate from the wing. This separation of the airﬂow from the top of the wing is a stall.

#### Page 6

6

VII. THE WING AS AIR "SCOOP"

We now would like to introduce a new mental image of a wing. One is used to thinking of a wing as a thin blade that slices through the air and develops lift somewhat by magic. The new image that we would like you to adopt is that of the wing as a scoop diverting a certain amount of air from the horizontal to roughly the angle of attack, as depicted in ﬁgure 10. The scoop can be pictured as an invisible structure put on the wing at the factory. The length of the scoop is equal to the length of the wing and the height is somewhat related to the chord length (distance from the leading edge of the wing to the trailing edge). The amount of air intercepted by this scoop is proportional to the speed of the plane and the density of the air, and nothing else.

FIG. 10: The wing as a scoop.

As stated before, the lift of a wing is proportional to the amount of air diverted down times the vertical velocity of that air. As a plane increases speed, the scoop diverts more air. Since the load on the wing, which is the weight of the plane, does not increase the vertical speed of the diverted air must be decreased proportionately. Thus, the angle of attack is reduced to maintain a constant lift. When the plane goes higher, the air becomes less dense so the scoop diverts less air for the same speed. Thus, to compensate the angle of attack must be increased. The concepts of this section will be used to understand lift in a way not possible with the popular explanation.

VIII. LIFT REQUIRES POWER

When a plane passes overhead the formerly still air ends up with a downward velocity. Thus, the air is left in motion after the plane leaves. The air has been given energy. Power is energy, or work, per time. So, lift must require power. This power is supplied by the airplane’s engine (or by gravity and thermals for a sailplane).

How much power will we need to ﬂy? The power needed for lift is the work (energy) per unit time and so is proportional to the amount of air diverted down

times the velocity squared of that diverted air. We have already stated that the lift of a wing is proportional to the amount of air diverted down times the downward velocity of that air. Thus, the power needed to lift the airplane is proportional to the load (or weight) times the vertical velocity of the air. If the speed of the plane is doubled the amount of air diverted down doubles. Thus the angle of attack must be reduced to give a vertical velocity that is half the original to give the same lift. The power required for lift has been cut in half. This shows that the power required for lift becomes less as the airplane’s speed increases. In fact, we have shown that this power to create lift is proportional to one over the speed of the plane.

But, we all know that to go faster (in cruise) we must apply more power. So there must be more to power than the power required for lift. The power associated with lift, described above, is often called the "induced" power. Power is also needed to overcome what is called "parasitic" drag, which is the drag associated with moving the wheels, struts, antenna, etc. through the air. The energy the airplane imparts to an air molecule on impact is proportional to the speed squared. The number of molecules struck per time is proportional to the speed. Thus the parasitic power required to overcome parasitic drag increases as the speed cubed.

Figure 11 shows the power curves for induced power, parasitic power, and total power which is the sum of induced power and parasitic power. Again, the induced power goes as one over the speed and the parasitic power goes as the speed cubed. At low speed the power requirements of ﬂight are dominated by the induced power. The slower one ﬂies the less air is diverted and thus the angle of attack must be increased to maintain lift. Pilots practice ﬂying on the "backside of the power curve" so that they recognize that the angle of attack and the power required to stay in the air at very low speeds are considerable.

At cruise, the power requirement is dominated by parasitic power. Since this goes as the speed cubed an increase in engine size gives one a faster rate of climb but does little to improve the cruise speed of the plane.

Since we now know how the power requirements vary with speed, we can understand drag, which is a force. Drag is simply power divided by speed. Figure 12 shows the induced, parasitic, and total drag as a function of speed. Here the induced drag varies as one over speed squared and parasitic drag varies as the speed squared. Taking a look at these curves one can deduce a few things about how airplanes are designed. Slower airplanes, such

#### Page 7

7

FIG. 11: Power requirements versus speed.

as gliders, are designed to minimize induced drag (or induced power), which dominates at lower speeds. Faster airplanes are more concerned with parasitic drag (or parasitic power).

FIG. 12: Drag versus speed.

IX. WING EFFICIENCY

At cruise, a non-negligible amount of the drag of a modern wing is induced drag. Parasitic drag, which dominates at cruise, of a Boeing 747 wing is only equivalent to that of a 1/2-inch cable of the same length. One might ask what aﬀects the eﬃciency of a wing. We saw that the induced power of a wing is proportional to the vertical velocity of the air. If the length of a wing were to be doubled, the size of our scoop would also double, diverting twice as much air. So, for the same lift the vertical velocity (and thus the angle of attack) would have to be halved. Since the induced power is proportional to the

vertical velocity of the air, it too is reduced by half. Thus, the lifting eﬃciency of a wing is proportional to one over the length of the wing. The longer the wing the less induced power required to produce the same lift, though this is achieved with an increase in parasitic drag. Low [Annotation 15] speed airplanes are aﬀected more by induced drag than fast airplanes and so have longer wings. That is why sailplanes, which ﬂy at low speeds, have such long wings. High-speed ﬁghters, on the other hand, feel the eﬀects of parasitic drag more than our low speed trainers. There- [Annotation 16] fore, fast airplanes have shorter wings to lower parasite drag.

There is a misconception held by some that lift does not require power. This comes from aeronautics in the study of the idealized theory of wing sections (airfoils). When dealing with an airfoil, the picture is actually that of a wing with inﬁnite span. Since we have seen that the power necessary for lift is proportional to one over the length of the wing, a wing of inﬁnite span does not require power for lift. If lift did not require power airplanes would have the same range full as they do empty, and helicopters could hover at any altitude and load. Best of all, propellers (which are rotating wings) would not require power to produce thrust. Unfortunately, we live in the real world where both lift and propulsion require power.

X. POWER AND WING LOADING

Let us now consider the relationship between wing loading and power. Does it take more power to ﬂy more passengers and cargo? And, does loading aﬀect stall speed? At a constant speed, if the wing loading is increased the vertical velocity must be increased to compensate. This is done by increasing the angle of attack. If the total weight of the airplane were doubled (say, in a 2-g turn) the vertical velocity of the air is doubled to compensate for the increased wing loading. The induced power is proportional to the load times the vertical velocity of the diverted air, which have both doubled. Thus the induced power requirement has increased by a factor of four! The same thing would be true if the airplane’s weight were doubled by adding more fuel, etc.

One way to measure the total power is to look at the rate of fuel consumption. Figure 13 shows the fuel consumption versus gross weight for a large transport airplane traveling at a constant speed (obtained from actual data). Since the speed is constant the change in fuel consumption is due to the change in induced power. The data are ﬁtted by a constant (parasitic power) and a term that goes as the load squared. This second term is just what was predicted in our Newtonian discussion of the eﬀect of load on induced power.

#### Page 8

8

FIG. 13: Fuel consumption versus load for a large transport airplane traveling at a constant speed.

The increase in the angle of attack with increased load has a downside other than just the need for more power. As shown in ﬁgure 9 a wing will eventually stall when the air can no longer follow the upper surface, that is, when the critical angle is reached. Figure 14 shows the angle of attack as a function of airspeed for a ﬁxed load and for a 2-g turn. The angle of attack at which the plane stalls is constant and is not a function of wing loading. The [Annotation 17] stall speed increases as the square root of the load. Thus, increasing the load in a 2-g turn increases the speed at which the wing will stall by 40%. An increase in altitude will further increase the angle of attack in a 2-g turn. This is why pilots practice "accelerated stalls" which illustrate that an airplane can stall at any speed. For any speed there is a load that will induce a stall.

XI. WING VORTICES

One might ask what the downwash from a wing looks like. The downwash comes oﬀ the wing as a sheet and is related to the details of the load distribution on the wing. Figure 15 shows, through condensation, the distribution of lift on an airplane during a high-g maneuver. From the ﬁgure one can see that the distribution of load changes from the root of the wing to the tip. Thus, the amount of air in the downwash must also change along the wing. The wing near the root is "scooping" up much more air [Annotation 18] than the tip. Since the root is diverting so much air the net eﬀect is that the downwash sheet will begin to curl

FIG. 14: Angle of attack versus speed for straight and level ﬂight and for a 2-g turn.

outward around itself, just as the air bends around the top of the wing because of the change in the velocity of the air. This is the wing vortex. The tightness of the curling of the wing vortex is proportional to the rate of change in lift along the wing. At the wing tip the lift must rapidly become zero causing the tightest curl. This is the wing tip vortex and is just a small (though often most visible) part of the wing vortex. Returning to ﬁgure 6 one can clearly see the development of the wing vortices in the downwash as well as the wing tip vortices.

FIG. 15: Condensation showing the distribution of lift along a wing. The wingtip vortices are also seen. (from Patterns in the Sky, J.F. Campbell and J.R. Chambers, NASA SP-514.)

Winglets (those small vertical extensions on the tips of some wings) are used to improve the eﬃciency of the wing by increasing the eﬀective length of the wing. The lift of a normal wing must go to zero at the tip because the bottom and the top communicate around the end. The winglets blocks this communication so the lift can

#### Page 9

9

extend farther out on the wing. Since the eﬃciency of a wing increases with length, this gives increased eﬃciency. One caveat is that winglet design is tricky and winglets can actually be detrimental if not properly designed.

XII. GROUND EFFECT

Another common phenomenon that is misunderstood is that of ground eﬀect. That is the increased eﬃciency of a wing when ﬂying within a wing length of the ground. A low-wing airplane will experience a reduction in drag by 50% just before it touches down. There is a great deal of confusion about ground eﬀect. Many pilots (and the FAA VFR Exam-O-Gram No. 47) mistakenly believe that ground eﬀect is the result of air being compressed between the wing and the ground.

To understand ground eﬀect it is necessary to have an understanding of upwash. For the pressures involved in low speed ﬂight, air is considered to be non-compressible. When the air is accelerated over the top of the wing and down, it must be replaced. So some air must shift around the wing (below and forward, and then up) to compensate, similar to the ﬂow of water around a canoe paddle when rowing. This is the cause of upwash.

As stated earlier, upwash is accelerating air in the wrong direction for lift. Thus a greater amount of downwash is necessary to compensate for the upwash as well as to provide the necessary lift. Thus more work is done and more power required. Near the ground the upwash is reduced because the ground inhibits the circulation of the air under the wing. So less downwash is necessary to provide the lift. The angle of attack is reduced and so is the induced power, making the wing more eﬃcient.

Earlier, we estimated that a Cessna 172 ﬂying at 110 knots must divert about 2.5 ton/sec to provide lift. In our calculations we neglected the upwash. From the magnitude of ground eﬀect, it is clear that the amount of air diverted is probably more like 5 ton/sec.

XIII. CONCLUSIONS

Let us review what we have learned and get some idea of how the physical description has given us a greater

ability to understand ﬂight. First what have we learned:

• The amount of air diverted by the wing is propor-

tional to the speed of the wing and the air density.

• The vertical velocity of the diverted air is propor-

tional to the speed of the wing and the angle of attack. • The lift is proportional to the amount of air di-

verted times the vertical velocity of the air.

• The power needed for lift is proportional to the lift

times the vertical velocity of the air.

Now let us look at some situations from the physical point of view and from the perspective of the popular explanation.

• The plane’s speed is reduced. The physical view

says that the amount of air diverted is reduced so the angle of attack is increased to compensate. The power needed for lift is also increased. The popular explanation cannot address this.

• The load of the plane is increased. The physical

view says that the amount of air diverted is the same but the angle of attack must be increased to give additional lift. The power needed for lift has also increased. Again, the popular explanation cannot address this.

• A plane ﬂies upside down. The physical view has

no problem with this. The plane adjusts the angle of attack of the inverted wing to give the desired lift. The popular explanation implies that inverted ﬂight is impossible.

As one can see, the popular explanation, which ﬁxates on the shape of the wing, may satisfy many but it does not give one the tools to really understand ﬂight. The physical description of lift is easy to understand and much more powerful.

---

Source: [Fermat's Library](https://fermatslibrary.com/) — https://fermatslibrary.com/s/how-airplanes-fly-a-physical-description-of-lift. More annotated papers: https://fermatslibrary.com/llms.txt
